7 Mile Solutions

Auction starts: March 29, 2018 at 10:00 AM CDT , Closing begins: April 5, 2018 at 10:00 AM CDT
Cary, IL

Items

Black & Decker 3/4 in. Magnetic Drill Press
Milwaukee Hammer Drill
LOT: (2) Sanders, (1) Reciprocating Saw, (2) Die Grinders
Gaston Heavy Duty Hand Held Buffer/Polisher
Eastwood Hand Held Drum Buffer/Polisher
Milwaukee Right Angle Grinder
LOT: (2) Right Angle Grinders
LOT: (2) Belt Sanders
Porter Cable Router
LOT: 1/2 in. Impact Wrench, Right Angle Drill, Jig Saw
LOT: Assorted Pneumatic Sanders & Die Grinders
LOT: (3) Pneumatic Belt Sanders
Fromm P300 Electric Bending Tool
LOT: Pneumatic Punch, Hammer & Rivet Gun
LOT: Assorted Cordless Tools
Jetline Model TEG-1A Sharpener
LOT: Assorted Tubing Benders, Flaring Tools & Cutters
LOT: Assorted Hand Tools, Shears, Wrenches, Pullers, Bolt Cutters, etc.
LOT: Electric Etcher, Magnetic Stirrer with Hot Plate, DC Power Unit, Soldering Guns
LOT: (2) Arbor Presses
Phase II 5C Collet Indexer
Balancing Stand
LOT: (2) Simplex Box Car Jacks
LOT: Digital Scale, Balance Scale, Time Clock
LOT: (4) Work Benches, (2) Folding Tables, (2) Vises with 3 in. & 4 in. Jaws (delay removal - 5 days)
Pepsi Machine with Key
Snack Vending Machine (no key)
LOT: Refrigerator, (2) Microwave Ovens, Toaster Oven on (2) Stainless Steel Rolling Carts
OCE 7055 36 in. Plotter
LOT: (3) Shop Vacs
LOT: (4) Rolling Shop Fans
LOT: (4) Rolling Shop Fans
LOT: (9) Floor Fans
LOT: Assorted Shop Stools & Articulated Lights
LOT: Steel Banding Cart with Tools & Clips
LOT: Steel Banding Cart with Tools & Clips
LOT: Rolling Shop Cart with 60 in. Fork Extensions, Battery Charger, Pneumatic Fluid Pump
Manual Die Lift Cart
Manual Die Lift Cart
Manual Die Lift Cart
LOT: (3) Sections 8 ft. x 8 ft. x 16 in. Rack with Contents of Fixtures & Parts
LOT: Steel Shelving Unit with Contents of Fixtures & Parts
LOT: Rolling Shop Cart with Contents of Large Taper & Straight Shank Drill Bits
LOT: Assorted Steel Letter & Number Stamping Kits
LOT: Assorted End Mills
LOT: Assorted End Mills
LOT: Assorted End Mills
LOT: Assorted Tap & Die Holders and Dies
LOT: Assorted Reamers
LOT: Assorted Reamers
LOT: Assorted Drill Indexes
LOT: Counterbores & Assorted Cutters
LOT: (3) Steel Work Benches with (2) 4 in. Jaw Vises
LOT: (2) Steel Cabinets with Contents of Abrasives & Assorted Tooling
LOT: Steel Cabinets with Contents of Assorted Drill Bits, Punches, Countersinks, Taps, Hardware
LOT: Steel Cabinets with Contents of Taps, Hardware, End Mills, etc.
LOT: Rolling Stainless Cart with Contents of Step Blocks & Assorted Clamping Supplies
LOT: Rolling Waterloo Tool Cart with Contents of Taps, Assorted Cutters, etc.
LOT: Whitney Manual Punches & Dies
LOT: Assorted Broaches on Rolling Cart
Famco Arbor Press on Stand
Jones & Lamson 14 in. Optical Comparator Model PC-14A, Acu-Rite DRO
LOT: Granite Surface Plates, (1) 24 in. x 36 in., (1) 18 in. x 24 in., (2) 12 in. x 18 in.
LOT: 36 in. x 72 in. Steel Surface Plate with 4 in. Jaw Vise
LOT: Assorted Small Steel Surface Plates, (2) Precision Parallel Blocks on Rolling Stainless Steel Cart
Rockwell Delta Bench Center
Outside Micrometer Set
24 in. - 30 in. Outside Micrometer
18 in. - 24 in. Outside Micrometer
12 in. - 18 in. Outside Micrometer
LOT: (4) Assorted Outside Micrometers
LOT: (5) Assorted Outside Micrometers
LOT: (5) Assorted Outside Micrometers
Outside Micrometer Set
LOT: Assorted Outside Micrometers
LOT: Assorted Outside Micrometers
LOT: 18 in. Mitutoyo Digital Caliper, 24 in. Vernier Caliper
LOT: (8) Small Dial Calipers
Brown & Sharpe 18 in. Height Gauge
18 in. Height Gauge
12 in. Height Gauge
Brown & Sharpe Height Gauge (No Magnetic Riser)
24 in. Vernier Style Height Gauge
LOT: 6 in. - 12 in. Bore Gauge with Setting Tool
LOT: (2) Precision Levels
LOT: Assorted Bore Gauges
LOT: Assorted Bore Gauges
LOT: Assorted Digital & Dial Indicators with Magnetic Stands
LOT: Assorted Magnetic & V-Blocks
LOT: Precision Vise, Sine Plate, T-Slot Fixture
J&S Wheel Dresser
LOT: (2) Johansson & Shore Hardness Testers
Federal Hardness Tester
LOT: Assorted Inspection Gauges & Tools
LOT: Assorted Inside Micrometers & Depth Gauges
LOT: Assorted Parallels
LOT: Assorted Gauge Blocks on Rolling Cart
LOT: Assorted Pin Gauges on Rolling Cart
LOT: (2) Lapping Stones on Rolling Cart
LOT: (2) Steel Cabinets with Contents of Assorted Pin Gauges & Inspection Equipment
LOT: (4) Assorted Blueprint Cabinets
Rockwell 14 in. Drill Press on 21 in. x 49 in. Production Base
Rockwell 14 in. Drill Press on 21 in. x 26 in. Production Base
Greenerd No. 3A Arbor Press
Famco No. 3 Ships Wheel Arbor Press
Dake Dura Press 25 Ton Adjustable Bed Hydraulic H-Frame Shop Press Model Force 25A, S/N 90604, 28 in. Between Frame
Pexto 58 in. Manual Pinch Roll No. 416E, S/N 44
LOT: (2) Assorted DiAcro Manual Bench Top Rotary Bar Benders on Steel Work Bench
Denison 6 Ton Hydraulic Gap Press, S/N 16578, 7 in. Throat, 11 in. x 16.5 in. Bed
Foster Bench Top Hydraulic Hole Punching Station, .75 HP Hydraulics
Pemserter Bench Top Pneumatic Insertion Press, S/N J4-3069, 18 in. Throat
Amada 20 Ton CNC Turret Punch Press Model Vipros 255, S/N AVP55209 (1999), 48 in. x 101 in. Ball Top Table with Twin Gripper Positioner, 31 Stations, (3) Auto Index Stations, Fanuc Series 18-P Control
LOT: Amada Tooling Cabinet with Large Quantity of Punches & Dies
Punch & Die Set-up Station
Amada Type Bench Top Punch & Die Grinder
Boschert Angle Power Notcher Model Mini S-K-30-120, S/N 223, 25.5 in. x 39.5 in. Work Table with Gauges
Amada 10 ft. x 1/4 in. CNC Hydraulic Squaring Shear Model M-3060, S/N 30601147 (1999), 60 SPM, 110 in. Right Squaring Arm with Stop, Support Arms, Programmable Back Gauge
Cincinnati 90 Ton CNC Hydraulic Press Brake Model 90FMX6, S/N 44791, 8 ft. Overall, 78.5 in. Between Housings, 7 in. Throat, Hurco Autobend 7 CNC Control (cylinder requires rebuild & installation)
Amada 80 Ton CNC Press Brake Model FBD-8025NT, S/N 80250413, 98.4 in. Bed, 86.6 in. Between Housings, 15.75 in. Throat, 5.9 in. Stroke, 16.54 in. Shut Height, Quick Release Clamps, Amada AMNC PC CNC Control
Verson AllSteel 45 Ton Press Brake, S/N 19174-2062-45, 78 in. Overall, 62 in. Between Housings, 7.5 in. Throat, 2.5 in. Stroke, 7.5 in. Shut Height, Power Ram Adjustment
LOT: Assorted Press Brake Dies on Rolling Cart
LOT: Assorted Press Brake Dies on (2) Racks
LOT: Assorted Press Brake Dies on (2) Racks
LOT: Assorted 4 in. Throat Uni-Punches
LOT: Assorted 8 in. Throat Uni-Punches
Whitney Manual Hydraulic Duplicator Model 635-A, S/N 635-085-24744, 36 in. Throat, 56 in. x 98 in. Work Table with Duplicator Bar
LOT: Whitney Fabricator Tooling & Accessories
LOT: Whitney Fabricator Tooling & Accessories
Okuma CNC Turning Center Model L1060/762E, S/N 10101173, 8 in. 3-Jaw Chuck, 12 Position Turret, Tailstock, Coolant, Okuma OSP700L CNC Control
Okuma CNC Turning Center Model L1060/762E, S/N 10010504, 8 in. 3-Jaw Chuck, 12 Position Turret, Tailstock, Coolant, Okuma OSP700L CNC Control
LOT: Okuma CNC Turning Center Model Crown L1060, Type 762E, S/N 10121314, 8 in. 3-Jaw Chuck, 12 Position Turret, Tailstock, Coolant, Okuma OSP700L CNC Controls, Toeliner Systems Loader (loader not operational)
Point Machinery Cooler Model CA-29, New 2005.
LOT: Assorted Tool Blocks & Holders for Okumas & 3J Collet Nose Chuck
Tecno Wasino CNC Single-Spindle Automatic Lathe Model G05, S/N 1325 (2002), Parts Loader, Gang Tooling, Fanuc Series 21i-T CNC Control (not operational)
Okuma CNC Vertical Machining Center Model MX-45VAE, S/N 10059283, 30 in. x 18 in. x 18 in. Travels, 20 in. x 39 in. Work Table, 10 HP Motor, 7000 RPM Spindle, 24 Position Tool Changer, Coolant, Okuma OSP700M CNC Controls
Milltronics 4-Axis CNC Vertical Mill Model RH-30, Series G, S/N 9080(0617), 24 in. x 66 in. Work Table, 31 in. Throat, Coolant, Centurion 7 CNC Control
Troyke DL-9-B 4th Axis Indexer with Tailstock & 3-Jaw Chuck Installed
Comet 3 HP Variable Speed 3-Axis CNC Vertical Mill Model V630, S/N 76588, 60 - 4200 RPM, 10 in. x 50 in. Work Table, Coolant, Autocon Dynapath Delta CNC Control
LOT: Assorted 30 Taper Tooling for Comet Mill
Milltronics CNC Lathe Model T20, S/N 3222(542), 12 in. 3-Jaw Chuck, 8 Position Turret, Tailstock, Coolant, Centurion V CNC Control (bad cover cable)
Tarnow 22 in. x 124 in. Gap Bed Engine Lathe Model TUJ-50M, 16 in. 4-Jaw & 12 in. 3-Jaw Chucks, Carriage with Cross Slide, Taper, Threading, Steady Rest, Tailstock, Coolant
LOT: 20 in. 4-Jaw Chuck, 24 in. T-Slot Face Plate
Bridgeport/Romi 13 in. x 46 in. Engine Lathe Model 13-5, S/N 30482, 7 in. 3-Jaw Chuck, Carriage with Cross Slide, Threading, Tailstock, Acu-Rite II DRO
Hardinge Precision Turret Lathe Model DSM-59, S/N DV-59-14851, Collet Closer, Turret, Coolant, Feed Tube
Bridgeport 2 HP Variable Speed Vertical Mill, S/N 223335, 9 in. x 48 in. Power Feed Work Table, 2-Way Power Knee, Bridgeport DRO
Bridgeport Series I 2 HP Vertical Mill, S/N 280080E, 9 in. x 48 in. Work Table, Former EZ Track, CNC Mill Control Missing (needs repair)
Kearney & Trecker Horizontal Mill Model H, S/N 38-5206, 13.5 in. x 64 in. Work Table, Arbor with Support
LOT: Assorted Tooling for Kearney & Trecker Mill
Cincinnati Special Purpose Horizontal Mill No. 2L, S/N 9A2U1K-48, with Tree 1 HP Vertical Head, 10 in. x 52 in. Work Table, Cincinnati Power Drive Dividing Head, Power Index, Custom Overarm
Moore Jig Borer No. 2, S/N 5233, 10 in. x 19 in. Work Table, Mini-Wizard Digital Readout
LOT: Assorted Jig Borer Accessories
Wysong & Miles 28 in. Box Column Drill Press, 18 in. x 22 in. Adjustable Work Table
LOT: (10) Assorted Cat 40 ER Collet Holders
LOT: (10) Assorted Cat 40 Tool Holders, Face Mills & Drill Chucks
LOT: (10) Assorted Cat 40 Tool Holders
LOT: (10) Assorted Cat 40 Tool Holders
LOT: (10) Assorted Cat 40 Tool Holders
LOT: Assorted ER Collets
LOT: Assorted ER Collets
LOT: (2) Cat 40 90� Milling Heads
LOT: Assorted 30 Taper Tooling
LOT: Assorted Soft Collets
LOT: Assorted ER Collet Holders & Tool Bushings
LOT: Assorted Boring Bars
LOT: Assorted Boring Bars
Dumore Tool Post Grinder
Dumore Tool Post Grinder
LOT: Carbide Inserts & Deburring Tool
LOT: Assorted Carbide Inserts
Jacobs Spindle Nose Lathe Chuck
LOT: (2) Aloris Tool Posts & Holder
LOT: Aloris Tool Post & Holders
LOT: Assorted Lathe Cutters, Insert Holders
LOT: Assorted Lathe Cutters & Knurlers
LOT: (4) Okuma #5 Live Centers (new in box)
LOT: Assorted Lathe Centers
LOT: Assorted Taper Shank Drill Chucks
LOT: Assorted Drill Chucks
LOT: Assorted Drill Chucks
LOT: (3) 5C Collet Fixtures
LOT: (2) 5C Collet Fixtures, (1) Pneumatic Foot Control
LOT: (4) 5C Collet Fixtures
LOT: Assorted 5C Collets
LOT: Assorted 5C Collets
LOT: Assorted 5C Collets
LOT: Assorted 5C Collets
LOT: (3) R8 Right Angle Heads
LOT: Assorted R8 Boring Heads & Drill Chucks
LOT: Assorted R8 Tooling
LOT: Assorted R8 Collets
LOT: Assorted R8 Collets
LOT: (5) Assorted Hold Down Kits
LOT: (4) Assorted Tapping Heads
LOT: (3) Assorted Tapping Heads
LOT: Assorted Angle Plates & Blocks on Cart
LOT: Assorted Lathe Chucks on Rolling Stainless Steel Cart
Cincinnati Milacron Tilting Rotary Turntable
Cincinnati Dividing Head & Tailstock
Rutland 8 in. Vertical & Horizontal Indexer
Air-Hydraulics Turntable
15 in. Vertical & Horizontal T-Slot Rotary Turntable
12 in. Vertical & Horizontal T-Slot Rotary Table with Aluminum Cam Mounted
12 in. T-Slot Rotary Turntable
12 in. T-Slot Rotary Turntable
10 in. T-Slot Rotary Turntable
LOT: 9 in. & 7 in. T-Slot Rotary Turntables
8 in. x 24 in. Magnetic Chuck
6 in. x 18 in. Magnetic Chuck
8 in. Round Magnetic Chuck
8 in. Kurt Machine Vise
6 in. Kurt Machine Vise
6 in. Kurt Machine Vise
6 in. Kurt Machine Vise
6 in. Kurt Machine Vise
6 in. Kurt Machine Vise
6 in. Kurt Machine Vise
6 in. Kurt Machine Vise
6 in. Kurt Machine Vise
6 in. Kurt Machine Vise
6 in. Bridgeport Machine Vise on Swivel Plate
6 in. Machine Vise
6 in. Machine Vise
6 in. Machine Vise
6 in. Machine Vise on Tilting Base
5-1/2 in. Machine Vise
5-1/2 in. Machine Vise
6 in. Vertical Machine Vise
LOT: (3) Small Vises
LOT: (3) Mechanics Vises
LOT: (3) Pipe Vises
ELB 14 in. x 40 in. Hydraulic Surface Grinder Type SW10VA1, S/N 132540375, 14 in. x 40 in. Electromagnetic Chuck, Over-the-Wheel Dresser, Coolant
Summit 12 in. x 40 in. Cylindrical Grinder Model RT-Super, S/N 220/60, Motor Driven Work & Wheel Heads, Motor Driven Drop Down Internal Spindle, Coolant
Chevalier 6 in. x 12 in. Surface Grinder Model FSG-612, S/N 01B-4571, Permanent Magnetic Chuck, Coolant
Majestic I.D. Grinder, S/N 513, Motor Driven Wheel Head & Work Head with 8 in. Magnetic Chuck
Dayton 8 in. Double End Pedestal Grinder
Dayton 8 in. Double End Pedestal Grinder
Darex Bench Top End Mill Sharpener Model E-90, S/N 95055F
Darex Bench Top Sharpener Series M, S/N 537642C
6 in. x 11 in. Bench Top Demagnetizer
Flex Shaft Grinder
Baldor 3 HP Double End 4 in. Belt Sander/Polisher
Walters 10 in. Double End Grinder/Polisher
Sunnen Precision Honing Machine Model MBB-1650, S/N 53001, Coolant
LOT: Hone Tooling & Accessories
LOT: Hone Tooling & Accessories
Dake Thomas Power Feed Mitering Cold Saw Model 350 S.TS.A, S/N 00-0907 (2000), 26 in. Power Stroker, Vise & Feed
Dake Thomas Mitering Cold Saw Model 350-S-Tech, S/N 06-00841 (2000), Stock Stop, Coolant
Delta 12 in. Mitering Abrasive Cut-Off Saw, Stock Stop
Grob 18 in. Vertical Band Saw Model NS18, S/N 6162, Butt Welder
DoAll 9 in. x 16 in. Horizontal Band Saw Model C4, S/N 234-681404
9 in. x 20 in. 2-Post Horizontal Band Saw, Coolant
Stanco Peer 58 KVA Rocker Arm Spot Welder Model AR-450, S/N 3022, 24 in. Throat, Entron EN1000 Timer & Control
Peer 58 KVA Rocker Arm Spot Welder Model AR-450, S/N 880063, 18 in. Throat, Entron Timer & Control
Lincoln 275 Amp Precision TIG Welder Model SquareWave TIG 275, with Cables & Gun
Lincoln 255 Amp TIG Welder Model SquareWave TIG 255, with Cables, Gun, Radiator
Chicago Electric Dual MIG Welder
Miller PlazCut 50 Amp DC Plasma Cutting System
LOT: (1) Bernard & (1) Linde Welding Radiators
KSM Stud Welder (as is)
LOT: (2) Widdervac Spot Fume Eliminators
Greyhound Hand Held Spot Welder
LOT: Torch Cart with Gauges, Hose, Torch (no bottles)
LOT: (2) Steel Cabinets with Contents of Welding Supplies & TIG Rod
LOT: (2) Shelving Units with Contents of Welding Wire & Fixtures
American 48 in. x 48 in. Welding Platen
LOT: Assorted Torches, Regulators & Clamps
LOT: (2) Steel Cabinets & Rolling Table with Contents of Fixtures and (3) Mechanics Vises
LOT: Assorted Large C-Clamps
LOT: Assorted Medium C-Clamps
LOT: Assorted Heavy Duty C-Clamps
LOT: (3) Rolling Steel Tables
Burr King Variable Speed Bench Top Band Sander Model 760
Leeson Variable Speed Bench Top Single End Polisher
Hammond 4-1/2 in. Belt Sander
Dayton 12 in. Disc Sander
Wilton 1 in. Belt / 8 in. Disc Sander
Delta 1 in. Belt Sander with Pivot Vise & Rotary Tool
4-1/2 in. Belt Sander
Kalamazoo 1 in. Belt Sander
Kalamazoo 2 in. Belt Sander
Kalamazoo 1 in. Belt Sander
Champion 15 HP 2-Stage Reciprocating Horizontal Tank Mounted Air Compressor Model HRA15-12, S/N R40A, with Ultra Air Refrigerated Dryer
Ultra Air Dryer
Kellogg American 10 HP Skid Mounted 2-Stage Reciprocating Air Compressor
5 ft. Receiver Tank
Clark 4850 lb. LP Forklift Model GCX-30, S/N GX-230-0566-9248, Solid Tires, Overhead Guard, 188 in. Lift of 3-Stage Mast, Side Shift (279 hours indicated)
Cub Cadet 9 HP OHV 26 in. Crawler Gas Snow Blower, Electric Start
LOT: Anti-Fatigue Mats on (1) Pallet
Famco No. 10 Kick Press
Modified Dewalt Radial Arm Saw with Router
:
Fairbanks Rolling Scale
 
LOT: DoAll Supply Cabinet with Contents of Fixtures & Hardware
LOT: Assorted Aluminum, Steel & Stainless Scrap
LOT: Steel Cabinet, Work Bench with 4 in. Jaw Vise, Shelf & Contents of Repairable Power Tools & Abrasives
LOT: Large Quantity of Milling Cutters
LOT: Assorted Steel & Stainless Sheet Cut-Offs
LOT: Rack & Palletized Sheet Steel Stock
LOT: Steel Rack with Contents of Sheet Steel, Angle, Round & Bar Stock, Aluminum and Material Cart
LOT: Assorted Wire, Brass, Copper etc. in (1) Crate
LOT: Approx. (15) Rolling Tables & Shelving Units
LOT: Approx. (10) Rolling Shop Carts
LOT: (2) Industrial Railroad Carts
LOT: (3) Hand Trucks
LOT: Steel Rack with Contents of Repairable Power Tools, Scrap Steel & Aluminum, etc.
LOT: Assorted Scrap Aluminum, Stainless, Steel in Approx. (13) Barrels & (2) Pallets
LOT: (2) Sections 8 ft. Wide x 42 in. Deep x 12 ft. High Pallet Rack with Wire Decking (delay removal - 5 days)
LOT: Contents of Rack including Machinery Parts & Fixtures, Caster Wheels, Packing Material
LOT: (2) Sections 8 ft. Wide x 42 in. Deep x 12 ft. High Pallet Rack with Wire Decking
LOT: Contents of Pallet Rack, Shipping Boxes, Stainless Baskets, Assorted Parts
LOT: (2) Rolling Stainless Steel Carts
LOT: Greenlee Pipe Rack with Contents of Stainless & Steel Pipe & Round Stock
LOT: (2) Work Benches & (2) Rolling Tool Carts
Oliver of Adrian File Saw
LOT: (6) Steel Top Work Benches (delay removal - 5 days)
LOT: (3) Rolling Stainless Steel Carts
LOT: (4) Shelving Units with Contents of Stainless & Steel Parts Inventory
LOT: (2) Tape Machines & Paper Roll on Desk
LOT: (3) Rolling Work Benches
LOT: (2) Rolling Stainless Carts & (1) Stainless Shelving Unit
LOT: (2) Rolling Steel Material Carts
LOT: Hardware Cabinet with Large Assortment Stainless & Steel Hardware & Fasteners
LOT: Shelving Unit with Contents of Assorted Hardware, Fasteners, Indexes & Supplies
LOT: Cabinet with Large Quantity of Hardware & Fasteners
LOT: Cabinet with Large Quantity of Hardware & Fasteners
LOT: (3) Sections 8 ft. Wide x 42 in. Deep x 12 ft. High Pallet Rack with Wire Decking (delay removal - 5 days)
LOT: Contents of Upper Shelf of Pallet Rack including Dust Collector, Fixtures & Machine Parts
LOT: File Cabinet & Shelving Units with Contents of Regulators, Filters & Fixtures
LOT: Work Bench, Rolling Carts & File Cabinet with Contents of Aluminum & Steel, Chuck Jaws, Assorted Tooling
LOT: Stainless Tool Cart with Contents of Chuck Jaws & Fixtures
LOT: Steel Shelving Unit with Contents of Assorted Material & Hardware
LOT: Steel Cabinet with Contents of Assorted Tooling & Supplies
LOT: Contents of Store Room including Steel Cabinet & Shelving with Contents of Abrasives, Fasteners, Hardware, etc.
LOT: Contents of Front Office including (3) Desks, (3) File Cabinets, (3) Chairs, HP 6500A & Canon Image Class Printers (no computers)
LOT: Contents of Closet including (4) File Cabinets, Herring-Hall-Marvin Safe (no combination - door open)

LOT: Contents of Middle Office including (3) Desks, Chairs, Cabinet with Office Supplies
LOT: Contents of Conference Room including Table, (6) Chairs, (3) Bookcases, Mini Refrigerator
Hitachi Seiki CNC Vertical Machining Center Model VM40J, S/N VMJ4235HL, 22 in. x 16 in. x 16 in. XYZ Travels, 16 in. x 35.25 in. Work Table, 6000 RPM, Seicos I Control.
OKK CNC Vertical Machining Center Model KCV-600, S/N 102/#MA62300 (1996), 60 in. x 25.20 in. x 25.20 in. XYZ Travels, 25 in. x 70 in. Work Table, 6000 RPM, CT50, 30 Position ATC, Coolant, Chip Augers, OKK Neomatic Control (Building #1)

Copyright © Proxibid Inc. t/a Wavebid 2024