Gilbertson Personal Property
Auction starts: November 28, 2017 at
12:30 PM CST
,
Closing begins: November 28, 2017 at
12:30 PM CST
River Falls, WI
Items
3point, 540 PT0, 1000 PTO, International 2250 Loader with 6ft bucket, 18.4R34 Rear tires(good tread), 3.1X10.50R15LT front tires (low tread), Serial #10874, has not run in two years (to be removed by buyer-buyer will have 1 week to remove)
|
540 PTO, tires hold air, Serial# RB56-604 (to be removed by buyer-buyer will have 1 week to remove)
|
540PTO, tires hold air, Hydraulic hoses cracked, Serial #SH108261 (to be removed by buyer-buyer will have 1 week to remove)
|
300 gallon, 27ft boom (to be removed by buyer-buyer will have 1 week to remove)
|
5HP, Model RA5T80V1, 208V, hardwired, 73"H
|
Including assorted air hose and 19"L air tank
|
Including motor with parts on floor, and big red 750lb engine stand
|
wood beam, 8ft long
|
Including (2) weed trimmers, and parts
|
Model F-110DM, 31.5"H
|
18"W x 46"L
|
Including assorted rods, reels, and Flambeau plastic case 63"L
|
23.5"W
|
Including 18"H bolt bins, hardware, and hinges up to 6'
|
Including chainsaw parts, chainsaw cases, and camping chairs
|
Including small metal shelves, grease, garage fluids, hardware, plastic milk crates, and more
|
Including torch cart 47"H, propane tank
|
Including levels, saws, 14" cutoff wheels, and plastic creeper
|
Including International, up to 17.25"L
|
34"W x 23.5 x 33.7"H
|
Including adjustable wrenches up to 15", snips, and pliers
|
assorted
|
up to 1"
|
Including 1/4", 3/8", and 1/2" drive
|
2.5HP, 40"W x 34"D x 60"H
|
Including riveter, shears, sprayers, hammer, and primitive tools
|
24.5"L
|
With contents of assorted tools, 27"W x 18.25"D x 54"H, no key
|
Including Hand augers up to 52"L, pipe wrenches, International plaque, and level
|
Including 15.5"L wood crate, bench grinder, 14.5"L wood mallet head, and more
|
Including hardware, wiring, hardhats, and more
|
Model 870, 300lb capacity
|
Including grease pails, belts, bug zapper, and high voltage extension cord
|
Including hardware, 6" steel casters, chain binder, and more
|
3HP, 12 gallon, with hose
|
with 6" vice, 31"D X 112"L X 35.75"H
|
Including welding helmets, Lincoln electric 225 amp welder
|
Adjustable, has damage
|
Including screwdrivers, hammers, and brace drills
|
Turns, 16"W X 18"H
|
10.5" and 12"
|
including 25.75"L level, wood block planes, and hay knife
|
Including golden glow prunes 15.5"L wood crate, Spearhead wood crate, and Hanson 60lb scale
|
With 5" vice and scrap iron, 48.75"W x 35.5"D x 35"H
|
3/4HP, 54.5"H
|
3/4HP, 5/8" chuck, 3.25" travel, 64.5"H
|
with (2) batteries and charger, unknown condition
|
with 18V battery and charger, unknown working condition
|
Missing (1) safety cover
|
Including 6" bench grinder, and assorted electric saws
|
Including wood rake 76.5"L (missing teeth), and scythe with grain cradle 43"L
|
with weights, 43.5"H, made in Beloit WI
|
with 16" Bar, needs work
|
with weights, 44.25" H, made in St. Paul
|
with 16" bar
|
including air grouping nailer, air stapler, and air palm nailer
|
with 3/4" slide bar
|
assorted
|
Model 01110
|
Model PL1682
|
21 total
|
120V, Model 315.228410, 61.5"W x 43"D x 41"H overall
|
Including 19" plastic tool box, hardware bins, stencils, and assorted hardware
|
with 18"bar, in case
|
with 14" bar
|
up to 26"
|
up to 22"
|
Including regulators, and air go torch
|
16 gallon, 5.5HP, with hose
|
Honda 4.0GX120 motor
|
18" antler spread
|
Made in Taiwan, SAE, 3/4"-2" sockets
|
Including Coleman 220F lantern in metal case, and 16" gas grill, used
|
1/2"- 1-1/4"
|
including N.H. Air Hacksaw, and (4) pipe wrenches up to 18"
|
including (2) molded poly sawhorses, and (2) boards, 7" x 1.5" x 96"L
|
Including 16" clamp, and wood tool carrier
|
Including Planter Jr. no.25 seed planter (no handle), and 23" wood crate
|
Including Quantum tackle box, Stanley headphone radio, and assorted hardware, steel utility shelf 37"H x 36"W x 15.5"D, drill doctor, and brace drill
|
Including 3-ton
|
with assorted parts, in, around and under, includes transmission by Crane, no title (to be removed by buyer-buyer will have 1 week to remove)
|
60"H x 38"W x 72"L
|
including (2) wood crates up to 24"L, and (2) trunks up to 32"L
|
40000 BTU, 110V
|
up to 34"L
|
Including pick, bucksaw, and scythe.
|
Item No. IH6012, new in box
|
2-drawer, 10"H x 18"W x 9.5"D
|
37"L, with 3"W cutting area
|
On mounting bracket, 17"W x 13.5"D
|
up to 60"L
|
including hatchet, hammer, saw, metal roller, hand saws, 3-point arm, and (2) 46"L sawhorses
|
Including 27"H galvanized trash can, rolling office chair, ratchet straps, Whirlpool dehumidifier, Holmes dehumidifier
|
12.5" thickness, 2HP, 120V, 26FPM
|
with 3 tier metal rolling cart, welder is 11"H x 10"W x 16.5"L
|
used in box, with iron horse folding work table
|
incomplete, 37"H x 48"W
|
Including wood and metal hand planes, and brace drills
|
49"H x 7"W
|
Unknown working condition, 34"L x 10"W x 15"D
|
Including front tractor bracket, drawbar, 25" plastic toolbox, creeper, Northland Snowmobile trailer bed 92"W x 98"L
|
Including 13" tile cutter, and plastplug (new in box)
|
Including Irwin quick-grip
|
Including Pneumatic 6" grinder, car body hammers, Waxmaster buffer in case
|
Including Plano 16" power toolbox, car parts, paint trays, rubber boots, and cement hand tools
|
including paints, 25" plastic toolbox, safety harness, scrap wood and steel above (including 3" square steel beam) and wood creeper
|
72"H x 60"W x 18"D each
|
Including 5-drawer steel file cabinet, trouble light, extension cord, hardware and organizers, metal utility shelf(71.5"H x 36.5"W x 15.5"D, tools on shelf not included)
|
Electric, Model 315.115041
|
Electric, 12", 4000RPM
|
Including shovels, forks, rakes, and more
|
Including shovels, scraper, hoe, forks, scrap steel and PVC up to 85"L, jumper cables, grease gun, and more
|
Including tomato cages, pails, metal gas cans, barrels, scrap steel, tire, and more
|
17"H x 34"W x 19"D
|
43"H cab rail, 77"W x 105"L bed, with oak boards(some missing)
|
10'L x 84.5"W x 102"H (to be removed by buyer-buyer will have 1 week to remove)
|
2' x 2' x 6'
|
damaged, 99"L x 30"W x 24"H
|
36" x 65", stand is 60.5"H x 42"W, includes nozzle and hose
|
38"H x 22"W x 71"L
|
Including Gambles, Purity, and Pennsylvania, one is dented
|
including auto parts, scrap, light fixtures, cordless tools for parts and more
|
including truck parts, tires, batteries, fence posts and scrap
|
13"L x 5"W x 5.75"H
|
near full
|
36"L, missing wood handle
|
including gm. grill shroud 54"W and grill
|
including watering can and (2) buckets up to 22"W
|
up to 22.5"W
|
16"W x 1.25" thick
|
22"W x 4" thick
|
36"w x 25"H, missing one mounting plate
|
62"W x 22"D x 21"H, no keys
|
37.5"L tub
|
38.5"L tub, some cracks in bottom
|
65.25"L x 14"W
|
including toolbox, I-beam, electrical cords, parts and weed trimmer(cant hook not included)
|
20" cut, motor is loose (currently not running)
|
including watering can, gas can, tractor seat, cant hook and cream can strainer
|
including small hand tools, electrical and pvc (all totes have damage)
|
including motors, battery and scrap
|
assorted widths, up to 10.5'L
|
including parts, tiller, propane tanks and scrap
|
including squirrel cage fans and winches
|
(6) 50lb bags
|
69.5"L, with 27
|
not original wheels
|
including barbed
|
mostly 1" thick, assorted widths and lengths up to 15'L
|
including (2) plastic patio chairs, wood crates, spindle and bench
|
with fenders and Owatonna 1974 bike license
|
Model pw-20, 20.5"D x 35"H, has fluid in it
|
including (2) 48" wood benches and Schumacher 12v battery charger
|
including mall, ax and pick
|
including 2" ratchet and 4" semi load strap
|
2000psi, 5.5hp, with hose and wand
|
16" bar, needs work
|
20" bar, needs work
|
including 19" Stanley toolbox with tire chains, tuff case 24"W and new 8'4" x 11'4" tarp
|
1hp, 115v, 14gal, unknown running condition
|
self propelled, 21", unknown running condition
|
including ice fishing poles and tip ups
|
140cc, like new(just needs cleaning)
|
with air filled tires, 19.75'W platform
|
model 315.212240
|
32"L x 10.5"W x 12.5"H
|
31.5"L
|
up to 10" spread
|
300lb capacity, only 12"W
|
including scrap iron, truck doors, lumber, tractor parts and assorted steel cable
|
including rakes, shovels, post hole digger and broom
|
including 4x8 sheets, 14"W tin, gas cans and sleds
|
including 2(37.5x 80"L uprights and 2(braces
|
73'L x 18"W
|
18.5"H x 2.5"W, has chips
|
72"L x 48"W
|
51"H
|
including splitting
|
model 0211
|
including 4 and 10-tine
|
including scrap iron, vintage bike, picnic table and snowmobile parts
|
140"L x 17"W
|
including lumber, snowmobile skis and feeder
|
7/8" hitch-damaged 518 motor, needs work, 26" platform,
|
29.5'H
|
serial no j-79647, two bad rear tires
|
including round fence posts up to 10'L
|
94"L x 20"H x 16"D, no keys
|
72"L x 48"W
|
16"L x 3' H, bent
|
including tractor cab, 1.25" square stock up to 21'L, burn barrel, rolling table and more
|