Magnetation: Complete Iron Ore Processing Mill
Auction starts: October 16, 2019 at
10:00 AM CDT
Bovey, MN
Auction Type: Live
Items
Milwaukee 14 in. Chop Saw
|
Milwaukee 14 in. Chop Saw
|
Milwaukee 14 in. Chop Saw
|
LOT: (3) Assorted Ridgid Pipe Wrenches, (2) Pipe Cutters
|
Klutch Model PA66-GF40 Hammer Drill
|
Klutch Model PA66-GF40 Hammer Drill
|
Bosch Model 11264EVS Hammer Drill
|
Hitachi Model DH38YE2 Hammer Drill
|
LOT: (2) Milwaukee 7-1/4 in. Circular Saws, (1) Milwaukee Model 6225 Band Saw
|
LOT: Dewalt Model DW292 Impact Gun, Milwaukee Model 9075-20 Impact Gun
|
Makita Model TW1000 Electric Impact Gun
|
Milwaukee 18V Cordless Impact Gun, with Battery & Charger
|
Makita Model GA9020 Right Angle Grinder
|
LOT: (5) Assorted Right Angle Grinders
|
Dremel Model 300 Kit
|
LOT: (1) Dewalt Model DW130V Drill, (1) Dewalt Model DW235G Drill
|
LOT: (3) Alemite 18V Cordless Grease Guns, with (4) Batteries & (1) Charger
|
LOT: (3) 18 Volt Grease Guns
|
LOT: Milwaukee Cordless Inspection Camera with Charger & Battery, (2) Assorted UV Dye & Oil Inspection Kits, (1) Gates EZ Align Tool
|
LOT: Assorted Combination Wrenches in (2) Buckets
|
LOT: Assorted Combination Wrenches in (2) Buckets
|
LOT: Assorted Combination Wrenches in (4) Buckets
|
LOT: Assorted 1-7/8 in. to 3 in. Combination Wrenches
|
LOT: Assorted Hammer Wrenches
|
LOT: (2) Socket Sets - (1) Metric & (1) Standard
|
LOT: (2) Socket Sets - (1) Metric & (1) Standard
|
LOT: (5) Assorted Socket Sets (not complete)
|
LOT: Assorted 3/4 in. & 1 in. Drive Sockets
|
LOT: (3) Assorted Hole Saw Sets
|
LOT: (5) Assorted Tap & Die Sets, (1) Box Assorted Taps
|
LOT: Assorted Electrical Connectors, (2) Sets Drill Attachments (not complete)
|
LOT: Assorted Cat Seal & Connector Sets, Cat Analyzer Laptop with 317-7485 Communication Adaptor3
|
Globe Hydraulic Pallet Jack
|
LOT: (3) Hydraulic Power Packs with Assorted Attachments
|
LOT: Proto 12-Drawer Rolling Tool Box, with Assorted Tools
|
Extreme Tools 11-Drawer Rolling Tool Box, with Assorted Tools
|
ATD 15-Drawer Rolling Tool Box with Assorted Tools, Craftsman 4-Drawer Tool Box
|
LOT: (4) Assorted Pneumatic Impact Guns
|
LOT: (6) Assorted Pneumatic Guns
|
LOT: (4) Assorted Pneumatic Guns - (3) Ratchets, (1) Scraper
|
Ingersoll Rand Percussive Air Hammer, with Bits
|
LOT: (5) Assorted Sledge Hammers, (6) Smaller Hammers
|
LOT: (14) Assorted Clamps, (3) Vise Grip Pliers
|
LOT: (2) Assorted Drill Bit Cabinets, with Assorted Bits
|
LOT: Assorted Torches & Safety Shields
|
LOT: Assorted Grinding Discs
|
LOT: (4) Assorted Shim Sets (not complete)
|
LOT: (4) Assorted Fall Protection Straps
|
LOT: Contents on Table including Trowels, Squares, Hole Saws, Levels, Grease Zerks (no table or vise)
|
8 ft. x 4 ft. x 42 in. High Metal Work Table
|
LOT: (2) Mobile Steel Tables - (1) 8 ft. x 4 ft. x 40 in. High with 8 in. Vise, (1) 4 ft. x 4 ft. x 36 in. High
|
LOT: (4) Assorted Steel Tables - (1) 8 ft. x 4 ft. x 36 in. High with 8 in. Vise, (1) 8 ft. x 4 ft. x 33 in. High, (1) 78 in. x 38 in. x 25 in. High Cutting Table with (4) Blade Attachments, (1) 4 ft. x 4 ft. x 48 in. High Cutting Table on Wheels
|
Miller 400 Amp Gold Star 302 Mobile Welder
|
Thermal Dynamics Cutmaster 52 Plasma Cutter, S/N MX52292753, with Cart
|
Oxy/Acetylene Torch Set with Cart (no tanks)
|
Miller Bobcat 250 Towable Diesel Welder, S/N MC012539R, 978 hours
|
LOT: Ridgid 535 Pipe Threader, S/N EAM20121A00, with (4) Assorted Heads & (2) 5 Gallon Buckets Cutting Oil
|
Ridgid 300 Pipe Threader, S/N ED34640K96, with (2) Heads
|
LOT: Jet HBS-1018W Horizontal Band Saw, S/N 12022285, Auto Oiler, Part of 5 Gallon Bottle Cutting Oil
|
Baileigh DP-1250VS Floor Type Drill Press, S/N G1311049 (2013), 22 in. x 18 in. Slotted Bed, Adjustable Speed, with Oiler, Machinist Vise
|
Coats 5045E Rim Clamp Tire Machine, S/N 1208102179
|
Milwaukee 14 in. Abrasive Chop Saw, with Stand
|
LOT: (9) Assorted Cubby Cabinets, (3) 4-Drawer Small Parts Cabinets (two drawers missing)
|
LOT: Plate Steel Cart, with Assorted Size Plate
|
Robinair 34788 Refrigerant Recovery System, S/N 254428
|
Mastercool 69788 Refrigerant Recovery System, S/N 316617
|
WTC Refrigerant Recovery System
|
AC Delco 2 Ton Mobile Engine Hoist
|
OTC 205061 Mobile Engine Stand, S/N 1311AD00943
|
ICE IDF-500 Space Heater, S/N 10101365, 500,000 BTU/hr., Electric Fan, No. 2 Furnace Oil Burner
|
ICE IDF-500 Space Heater, S/N 10101085, 500,000 BTU/hr., Electric Fan, No. 2 Furnace Oil Burner
|
LOT: (1) Eagle 90 Gallon Flammable Storage Cabinet (1992), (1) Jamco Flammable Storage Cage
|
Eagle 90 Gallon Flammable Storage Cabinet (1992)
|
Atlas Copco GA15FF Tank Mounted Screw Type Air Compressor, S/N WUX585042 (2012)
|
Arcan 50 Ton Model CP500 H-Frame Press
|
Associated 6002B Battery Charger, 100/80/50/40 Amp Charge, 400 Amp Engine Start
|
Associated 6002B Battery Charger, 100/80/50/40 Amp Charge, 400 Amp Engine Start
|
Napa 300A 6/12/24 Volt Battery Charger
|
Dewalt 8 in. Double End Grinder, on Stand
|
LOT: (1) Max 42 in. Air Circulation Fan, (1) Craftsman 6.5 HP, 20 Gallon Shop Vacuum
|
Ridgid GP80145SW Gas Powered Mobile Air Compressor, Subaru 6.0 SP170 Engine
|
North Star 109183D Portable Semi-Trash Water Pump, 4 in. x 3 in., with Honda GX240 Gas Engine
|
Honda Portable Water Pump, 3-1/2 in x 3 in., with Gas Engine
|
Honda Portable Water Pump, 3-1/2 in x 3 in., with Gas Engine
|
North Star 106130 Portable Trash Pump, 3 in. x 3 in., with Honda GX240 Gas Engine
|
North Star 106130 Portable Trash Pump, 3 in. x 3 in., with Honda GX240 Gas Engine
|
North Star 106130 Portable Trash Pump, 3 in. x 3 in., with Honda GX240 Gas Engine
|
North Star 106130 Portable Trash Pump, 3 in. x 3 in., with Honda GX270 Gas Engine
|
Direct Flow Model 7.0 Portable Water Pump, 1-3/4 in. x 1-3/4 in., with Gas Engine
|
Honda Portable Water Pump, 3 in. x 3 in., with Honda 160 Gas Engine
|
Honda Portable Water Pump, 3 in. x 3 in., with Honda 160 Gas Engine
|
LOT: (9) Assorted Jack Stands
|
LOT: (3) Sets Heavy Duty Motor Grader Tire Chains
|
American Forge & Foundry 80 Ton Model 549SD Pneumatic Floor Jack, S/N 20141184320
|
American Forge & Foundry 50 Ton Model 547SD Pneumatic Floor Jack, S/N SNT1006613
|
American Forge & Foundry 50 Ton Model 547SD Pneumatic Floor Jack, S/N SNT1006504
|
Napa 22 Ton Professional Pneumatic Floor Jack
|
3 Ton (est.) Hydraulic Floor Jack
|
Enerpac Hydraulic Power Pack System including ZE4 Class Electric Power Pack, (4) 200 Ton (est.) CLSG1506 Bottle Jacks, (3) Assorted Manual Power Packs
|
LOT: (9) Assorted Bottle Jacks
|
Milwaukee 4000 lb. Heavy Equipment Jack
|
LOT: Assorted 1 in. & 2 in. Choker Straps, 4960 lb. & 2460 lb. (unused)
|
American Machine Q150 Line Boring Machine
|
LOT: Assorted Chains & Straps
|
LOT: (2) CM Model 653 Manual Chain Hoists - (1) 1-1/2 Ton, (1) 1 Ton (new)
|
LOT: Assorted Chain & Manual Hoists
|
LOT: Assorted Shackles, Basket & I-Beam Clamp
|
Renegade 45 in. Job Box
|
Renegade 45 in. Job Box
|
Renegade 45 in. Job Box
|
Renegade 45 in. Job Box
|
Renegade 45 in. Job Box
|
Renegade 45 in. Job Box
|
Renegade 45 in. Job Box
|
Ridgid 2048-0S Job Box
|
LOT: Miscellaneous Equipment including Blower, Chain, Air Pig, Steel Fittings, (3) Ladders, Shovels, Contents of (2) Pallets & Along Wall
|
LOT: Lubricant Distribution System including Pneumatic Pumps, (7) Assorted Hose Reels, Barrel with Pump, Grease Barrel with Pump & Reel, Assorted Jugs (on cinder block wall)
|
Landa VLP8-30024C LP Gas Steam Cleaner, S/N 11095809-100001, 4652 hours
|
40 Gallon Parts Washer
|
Lanair MX300 Waste Oil Heater with 215 Gallon Storage Tank
|
LOT: (10) Assorted Air Hose Reels (mounted in shop)
|
Kone 5 Ton x 52 ft. Span Single Girder Top Running Bridge Crane, 100 ft. (est.) Run, Radio Controlled, with Rail & Electrics
|
10,000 Cap. Adjustalble Length Spreader Bar
|
Challenger/Cat MT755 Track Tractor, VIN AGCMT755KALM40674, Enclosed Cab, Cat C-9 Engine, 4250 hours indicated
|
Haybuster Model 2564 Bale Processor, PTO Powered, 6 ft. 6 in. Box, Rotating Chute
|
Caterpillar 980K Wheel Loader, S/N LW7K01913, 7.5 cu. yd. Bucket, A/C, Joystick Steering, Load-Rite Scale System, 17,224 hours indicated
|
Caterpillar D6T Crawler Tractor, S/N KZJB00246, EROP, 153 in. Blade, 13,760 hours indicated
|
Komatsu D65PX Crawler Tractor, S/N 80546, EROP, 152 in. Blade, 15,286 hours indicated
|
Caterpillar 740 6x6 Articulated Tanker Truck, S/N LB1P04965, 8000 Gallon Tank, 24,123 hours indicated
|
Caterpillar 740 6x6 Articulated Dump Truck, S/N JB1P05723, 14,271 hours indicated
|
Caterpillar 740 6x6 Articulated Dump Truck, S/N VB1P06518, 20,132 hours indicated
|
Caterpillar 40 ton. Model 740 Dump Box, with Tailgate
|
Caterpillar 140M All Wheel Drive Motor Grader, 14 ft. Blade, Dual Joystick
|
Caterpillar 349EL Hydraulic Excavator, S/N CTFG00269, 12 ft. 8 in. Stick, Rear View Camera, 70 in. Bucket, 21,487 hours indicated
|
Caterpillar 336DL Hydraulic Excavator, S/N PW3K00708, Bucket, 13,166 hours indicated (no hydraulics)
|
Komatsu PC650 LC Hydraulic Excavator, S/N A25002, 11 ft. 10 in. Stick, Sand Bucket, 18,152 hours indicated
|
Caterpillar 320CL Hydraulic Excavator, S/N ANB01596, 9 ft. 4 in. Stick, Bucket, Amphibious Carriage, 6368 hours indicated (tracks not attached)
|
Caterpillar 302.5 Mini Excavator, S/N PGBB02684, Bucket, Swing-Away Boom, Auxiliary Hydraulics, Dozer
|
Caterpillar 236B Skid Steer Loader, S/N CHEN08989, Quick Change Bucket, Auxiliary Hydraulics, Joystick Steering, 4310 hours indicated
|
Virnig Skid Steer Hydraulic Brush Attachment, Manual Angle
|
Caterpillar 72 in. Skid Steer Bucket, .57 cu. yd.
|
Custom Skid Steer Attachment, 78 in. Blade
|
Caterpillar TL1055 4x4xL Telescopic Forklift, S/N TBM00843, 55 ft. Reach, Hydraulic Leveling, Hydraulic Stabilizer, 6035 hours indicated
|
JLG G943A 4x4x4 Telescopic Forklift, S/N 160029542, 43 ft. Reach, Hydraulic Leveling, 7021 hours indicated (Delayed Removal - 11/6/2019)
|
1999 Sterling Dump Truck, Cummins Diesel, 15 ft. Plow, 12 cu. yd. (est.) Box
|
C.W. Machine Work Dust Suppression System, S/N DD0040, Mobile Trailer Mounted, Yanmar 4-Cylinder Diesel Engine, Honda GX240 Gas Powered Trash Pump with Hoses
|
2012 PJ 20 ft. Tandem-Axle Flatbed Trailer, 14,000 lb. Capacity, Stowed Ramps
|
Genie 245/25 Articulated Boom Lift, S/N 24525-21444
|
Argo Avenger 8x8 ATV, Winch, Rubber Tracks
|
Caterpillar 5000 Gallon Model 613C Water Truck, S/N OEM0121, 5587 hours indicated (condition unknown)
|
International F2575 Tandem-Axle 1981, with 5000 Gallon Tank, Drop 3rd Axle, 83,567 miles indicated (condition unknown)
|
Empire 6 ft. Rock Bucket, S/N 21676, 2.5 cu. yd. Capacity (for Cat 336DB)
|
Fleco 4 ft. Excavator Rock Bucket, (5) Teeth
|
Empire 76 in. Rock Bucket, S/N 58000-4 (for Cat 345TB)
|
Caterpillar 61 in. Rock Bucket
|
Empire 54 in. Rock Bucket
|
Empire 55 in. Rock Bucket
|
Hydraulic Quick Connect
|
Ripper Tooth Connector
|
Caterpillar 4-Tine Thumb
|
18 ft. 7 in. Rake Attachment, 14-Tine
|
Komatsu 12 ft. 8 in. Model D65PX Blade Attachment, S/N 5068
|
Thompson 6 in. x 6 in. Pump, S/N 6JSCEN-130 (2012), Trailer Mounted, John Deere 4-Cylinder Diesel, 989 hours indicated
|
Thompson 6 in. x 6 in. Pump, S/N 6JSCEN-033 (2010), Trailer Mounted, John Deere 4-Cylinder Diesel, 176 hours indicated (intake missing)
|
Thompson 6 in. x 6 in. Pump, S/N 6JSCEN-131 (2011), Trailer Mounted, John Deere 4-Cylinder Diesel, 5257 hours indicated
|
Thompson 6 in. x 6 in. Pump, S/N 6JSCEN-114 (2012), Trailer Mounted, John Deere 4-Cylinder Diesel, 8785 hours indicated
|
Thompson 6 in. x 6 in. Pump, S/N 6JSCEN-039 (2010), Trailer Mounted, John Deere 4-Cylinder Diesel, 4069 hours indicated
|
Bruker S8 Tiger Wave Length Dispersive X-Ray, S/N 207151, with PowerVar Security, Power Back-up, Haskris Cooler
|
TM Engineering 6 in. Roll Crusher, S/N 120813
|
Morse Jaw Crusher, S/N 2000-J65, 6 in. Jaws, 3 in. Max. Feed, 3 HP Motor
|
Marcy GV Roll Crusher, S/N 31-9-410-8C, 1/2 in. Max. Feed
|
Outotec Model SL0N-100 Electromagnetic Chamber, S/N PS-SL1012 (2013), Dry Mass 2200 kg, with Control Panel
|
Retsch PM200 Planetary Ball Mill, Dual Cylinders
|
Spex Sample Prep Model 8530 Shatter Box (condition unknown)
|
Grieve 333 Double-Door Oven, S/N 111185A0114, 36 in. Wide x 37 in. Deep x 36 in. High
|
LOT: (2) Assorted Slurry Pots - (1) 2 ft. x 1 ft. Dia, (1) 14 in. x 8 in. Dia.
|
LOT: 54 in. x 27 in. Containment Work Bench, with (30) Assorted Sieves
|
8 ft. x 64 in. Double-Side Exhausted Work Bench, with (2) Vent Hoods, Blower & Duct Work
|
LOT: (2) Claisse M4 Gas Fluxers, Fusion, (1) Control Handle
|
LOT: (1) Cole-Palmer 12 in. x 12 in. Hot Plate, (1) Cole-Palmer 08895-2 Ultrasonic Cleaner, (1) Airgas Y12-244B5680 Regulator (new)
|
LOT: (3) Assorted Tables - (1) 5 ft. x 2 ft. x 34 in. High Stainless Steel, (2) 5 ft. x 30 in. x 34 in. High Steel
|
LOT: (2) Tables - (1) 5 ft. x 30 in. x 34 in. High, (1) 4 ft. x 2 ft. x 30 in. High
|
LOT: Assorted Lab Equipment including Gloves, Face Shields, Scales, Mortal & Pestal, Glassware, Shop Vac, Cabinet
|
Krebs RM300 Slurry Pump, 250 HP
|
Krebs Millmax MM150 Slurry Pump
|
Warman 8/6 AH Slurry Pump, 75 HP
|
Metso HM260 Slurry Pump, 200 HP
|
Krebs Millmax MM200 Slurry Pump, 200 HP
|
Krebs Millmax MM150 Slurry Pump, 50 HP
|
Krebs Millmax MM150 Slurry Pump, 50 HP
|
Krebs Millmax MM200 Slurry Pump, 150 HP
|
Durco Flowserve MK3-STD Centrifugal Pump, Size 2KX4X3-1 ORV, 50 HP
|
Krebs Millmax MM200 Slurry Pump, 150 HP
|
Krebs Millmax MM200 Slurry Pump, 150 HP
|
Krebs Millmax MM150 Slurry Pump, 50 HP
|
Krebs Millmax MM150 Slurry Pump, 50 HP
|
Durco Flowserve MK3-STD Centrifugal Pump, 50 HP
|
Krebs Millmax MM200 Slurry Pump, 150 HP
|
Krebs Millmax MM200 Slurry Pump, 150 HP
|
Krebs Millmax MM150 Slurry Pump, 50 HP
|
Durco Flowserve MK3-STD Centrifugal Pump, 50 HP
|
Durco Flowserve 6FRBH121 Centrifugal Pump, 1725 GPM, 60 HP
|
Durco Flowserve 6FRBH121 Centrifugal Pump, 1725 GPM, 60 HP
|
Durco Flowserve 6FRBH121 Centrifugal Pump, 1725 GPM, 60 HP
|
Krebs Millmax MM150 Slurry Pump, 40 HP
|
Metso 1M02 Slurry Pump, 50 HP
|
Krebs Millmax MM150 Slurry Pump, 50 HP
|
Metso MM150 Slurry Pump, 40 HP
|
Krebs Millmax MM150 Slurry Pump, 40 HP
|
Krebs Millmax MM400 Slurry Pump, 250 HP
|
Krebs Millmax MM400 Slurry Pump, 250 HP
|
Krebs Millmax MM250 Slurry Pump, 200 HP
|
Krebs Millmax MM200 Slurry Pump, 200 HP
|
Krebs Millmax MM200 Slurry Pump, 75 HP
|
Krebs Slurry Max Slurry Pump, 125 HP
|
Krebs Millmax MM200 Slurry Pump, 150 HP
|
Krebs Millmax RM300 Slurry Pump, 250 HP
|
LOT: Miscellaneous Equipment including Tool Belts, Adjustable Wrenches, Screw Drivers, Pliers, Pipe Wrenches, Vise Grips (contents of Strong Hold cabinet)
|
Strong Hold 2-Door Cabinet, 68 in. Wide (cabinet only)
|
LOT: Miscellaneous Equipment including Socket Sets, Combination Wrenches, Hammers, Welding Helmets (contents of Strong Hold cabinet)
|
Strong Hold 2-Door Cabinet, 68 in. Wide (cabinet only)
|
LOT: Miscellaneous Equipment including Sockets, Combination Wrenches (contents of Strong Hold cabinet)
|
Strong Hold 2-Door Cabinet, 68 in. Wide (cabinet only)
|
LOT: Miscellaneous Equipment including Electric Power Tools, Cordless Tools (no batteries), Power Packs, Bottle Jack, Come-Alongs, Combination Wrenches, Safety Harness & Straps, (contents of wood shelves, steel table & on wall - steel table not included)
|
62 in. x 48 in. x 36 in. High Steel Table with 8 in. Vise (table only)
|
LOT: 90 Gallon Flammable Storage Cabinet, Battery Charger, Oxy/Acetylene Cart, Ladder, (2) Emergency Eye Wash Stands, Hose Reel, Pressure Washer, Steel Stand, Assorted Hose (located around outside of tool cage)
|
Krebs Millmax HM300 Slurry Pump, 100 HP
|
Metso MM200 Slurry Pump, 60 HP
|
Metso MM200 Slurry Pump, 60 HP
|
LOT: Assorted Wire on (55) Spools including (3) Spools of Flex Conduit
|
Atlas Copco GA15 Package Air Compressor, S/N WUX584832 (2011), 125 PSI, 20 HP
|
Atlas Copco GA15 Package Air Compressor, S/N WUX584841 (2011), 125 PSI, 20 HP
|
Atlas Copco GA15 Package Air Compressor, S/N WUX585454 (2013), 125 PSI, 20 HP
|
Atlas Copco GA15 Package Air Compressor, S/N WUX585243 (2012), 125 PSI, 20 HP
|
Atlas Copco CD504 Air Dryer, S/N AP1092006 (2012)
|
Atlas Copco CD70+ Air Dryer, S/N AP1089899 (2011)
|
Vertical Air Receiver (2011)
|
Dekker 800 HP Vacuum Pump (2015), Skid Mounted (never installed)
|
McLanahan Log Washer
|
Metso VXX16 Vibratory Screen, S/N SM1173, Size 6X16DD, Incline Scalping, 3-Step Tapered Grizzly Bars
|
Metso Ty-Rock Vibratory Primary Screen, S/N SMSN1170/CBM, 2-Deck
|
Metso Ty-Rock Vibratory Primary Screen, S/N SMM149, Size 5X14, 2-Deck
|
Superior 30 in. x 70 ft. Model 30X70PRSC Mobile V-Belt Conveyor, S/N 35565-09, 145 ft. Belt Length
|
Rapat 24 in. x 43 ft. Model TCTR4324 Stationary V-Belt Conveyor, S/N C81476
|
Moby Dick Drive-Thru Truck Under Carriage & Wheel Washer (not installed)
|
Liquid Waste Pit Hog Hydraulic Dredge, 75 HP Pump, 20 ft. x 8 ft. 5 in. Flotation Platform
|
LOT: (2) Scrap Light Plants, (2) 300 Gallon Diesel Fuel Tanks, (2) Assorted Transfer Fuel Tanks, Gas Generator
|
LOT: Assorted Plastic Pipe up to 22 in. O.D. (includes all above-ground on site - approx. 5 miles plus)
|
McElroy Pipe Welder
|
LOT: Assorted Steel Pipe & Fittings (includes rubber line pipe & fittings in both lay down yards)
|
LOT: Assorted Stainless REV Machine Parts, Assorted Sizes
|
LOT: Assorted V-Belt Conveyor Idler Rollers
|
LOT: (4) Snyder 18 in. Nautilus Pipe Floats
|
Arctic Cat HDX 700 Prowler Quad (parts machine)
|
LOT: Assorted Tractor & Truck Tires, in Various Conditions
|
LOT: Assorted Aluminum Electrical Trough
|
LOT: (4) Wehr Cavex Cyclones, with Assorted Parts
|
LOT: Assorted Structural Steel I-Beams & Plate
|
ABB Style F4KE217VKF Transformer, S/N 13JC653660004 (2013), 2000 KVA, 4160 Hi Volt, 480 Low Volt (never installed)
|
Eaton Style F4KE017PFV Transformer, S/N 13JC597800004 (2013), 1000 KVA, 4160 Hi Volt, 480 Low Volt
|
T&R Electric Transformer, S/N 140124-1, 500 KVA, 4160 Hi Volt, 480 Low Volt (located in Slon building - never installed)
|
Post Clover Neutral Grounding Resistor, S/N S055899-1-2 (2012), L-L Volts 4160, L-N Volts 2400
|
Post Clover Neutral Grounding Resistor, S/N 5055899-1-1 (2012), L-L Volts 4160, L-N Volts 2400
|
V&F Transformer Corp. Dry Type Transformer, Class AA, 112.5 KVA, 3-Phase, 4160 V Delta-480/277V (located in warehouse - never installed)
|
Hammond Power Solutions MV3S045SB Transformer, S/N 449781, 4160 Hi Volt, 208/120 Low Volt (new)
|
Hammond Power Solutions MV3S045SB Transformer, S/N 449780, 4160 Hi Volt, 208/120 Low Volt (new)
|
LOT: (2) Transformers, FGS Shielded General Purpose, 75 KVA, 240 x 480 Hi Volt, 120/240 Low Volt, includes (2) Disconnect Switches
|
LOT: (2) Transformers, FGS Shielded General Purpose, 75 KVA, 240 x 480 Hi Volt, 120/240 Low Volt, includes (2) Disconnect Switches
|
Allen Bradley Centerline 2100 MCC, (10) Panel, 600 Amp Main Breaker, 45 KVA Primary Breaker, 25 KVA Instrument Panel, (35) Assorted Starters, Breakers, (2) Variable Speed Drives (located in MCC building #5 - external wire not included)
|
Transformer, Approx. 500 KVA
|
Complete Truck Dump Feeder Line Consisting of Metso 6 x 6 Double Deck Vibrating Grizzly Screen, Metso 5 ft. x 30 ft. Truck Pocket Feeder, Rapat 45 in. Wide x Approximately 100 ft. Long Trough Roll Grizzly Reject Conveyor, Plus Associated Pumps Beneath Grizzly Screen
|
Rapat 30 in. Wide x Approximately 330 ft. Trough Type Primary Screen Feed Conveyor With 60 HP Motor (extending from truck dump structure to process mill)
|
Spare Primary Screen Belt Conveyor, New, Approximately 500 ft. Length
|
Allen Bradley Motor Control Panel, Horizontal Power 1200A, Powerflex Variable Speed Drive 100 HP ND/75 HP HD (located in warehouse)
|
GE Panel Board Enclosure Cabinet
|
Allen Bradley Motor Control Panel, Horizontal Power 800A, Powerflex 753 VSD 100 HP ND/75 HP HD
|
Allen Bradley Motor Control Panel, Horizontal Power 800A, Powerflex 753 VSD 125 HP ND/100 HP HD
|
Square D 800 Amp Heavy Duty Switch Cabinet
|
Allen Bradley Motor Control Cabinet, Horizontal Power 1200A, Powerflex 755 VSD 125 HP ND/100 HP HD
|
Allen Bradley Motor Control Cabinet, Horizontal Power 1200A, Powerflex 755 VSD 100 HP ND/75 HP HD
|
Allen Bradley 3-Panel MCC, 1200 Amp Each Panel, (2) Starters
|
Allen Bradley MCC with (3) Starters & (1) Switch
|
Allen Bradley MCC Cabinet with Disconnect Switch, 800 Amp
|
Allen Bradley MCC Cabinet, 800A, Powerflex 753 VSD 75 HP ND/60 HP HD, Disconnect Switch
|
Allen Bradley MCC Cabinet, 1200A, Powerflex 755 VSD 100 HP ND/75 HP HD, Disconnect Switch
|
Allen Bradley MCC Cabinet, 800A, Powerflex 753 VSD 125 HP ND/100 HP HD, Disconnect Switch
|
Allen Bradley 2-Panel MCC Cabinet, (2) Starters, 800 Amp Each Panel
|
Allen Bradley 3-Panel MCC, (17) Starters, (1) Switch, 1200 Amp Each Panel
|
Allen Bradley 3-Panel MCC, (7) Starters, (2) Disconnects, 800 Amp Each Panel
|
WTC 532-244 Modified Track Press, S/N 2891
|
WEG 125 HP Motor, 900 RPM, 3-Phase, Frame 315SM
|
WEG 125 HP Motor, 3520 RPM, Frame 444/5TS
|
Toolmex 125 HP Motor, 1800 RPM, Frame 444T
|
Teco Westinghouse 100 HP Motor, 1200 RPM, Frame 444T
|
Teco Westinghouse 250 HP Motor, 1800 RPM, Frame 449T
|
Teco Westinghouse 250 HP Motor, 1800 RPM, Frame 449T
|
Teco Westinghouse 200 HP Motor, 1200 RPM, Frame 449T
|
Toolmex 150 HP Motor, 1790 RPM, Frame 445T
|
Teco Westinghouse 125 HP Motor, 1800 RPM, Frame 444T
|
Teco Westinghouse 250 HP Motor, 1800 RPM, Frame 449T
|
450 HP Motor, 1200 RPM, Frame 586/7T2
|
Toshiba 450 HP Motor, 1180 RPM, Frame 5011USC
|
Toshiba 450 HP Motor, 1180 RPM, Frame 5011USC
|
LOT: (1) Teco Westinghouse 50 HP Motor, 3500 RPM, Frame 326TS, (1) Teco Westinghouse 60 HP Motor, 1800 RPM, Frame 364T
|
LOT: (1) Teco Westinghouse 40 HP Motor, 1200 RPM, Frame 364T, (1) WEG 40 HP Motor, 1180 RPM, Frame 364/5T
|
LOT: (2) WEG 40 HP Motors, 1180 RPM, Frame 364/ST
|
LOT: (1) Nema 30 HP Motor, 1765 RPM, Frame 286T, (1) Teco Westinghouse 30 HP Motor, 3600 RPM, Frame 286TSC, (1) Teco Westinghouse 30 HP Motor, 1770 RPM, Frame 286T
|
LOT: (6) Assorted 1 HP & 1.5 HP Motors (in boxes)
|
LOT: (1) Toolmex 25 HP Motor, 1800 RPM, Frame 284TC, (1) Toolmex 25 HP Motor 1765 RPM, Frame 284TC
|
LOT: (1) 10 HP Motor, 1200 RPM, Frame 256TC, (2) 10 HP Motors, 1800 RPM, Frame 215TC
|
LOT: (2) 7.5 HP Motors
|
LOT: (3) Assorted Motors - (1) 20 HP, (2) 15 HP
|
LOT: (4) Derrick Vibratory Screen Motors, 2.5 HP, 1800 RPM (two rebuilt, never installed)
|
LOT: (4) Assorted 7.5 HP Motors
|
Teco Westinghouse 100 HP Motor, 1800 RPM, Frame 405T
|
LOT: (2) Toshiba 75 HP Motors, 1800 RPM, Frame 365T
|
LOT: (10) Assorted Motors, 1 HP to 15 HP
|
LOT: (5) Assorted Flammable Storage Cabinets including (1) Justrite 90 Gallon, (1) Jamco 90 Gallon, (2) Jamco 30 Gallon, (1) Jamco 12 Gallon
|
Caterpillar LBR FRK P Y Forks, 5 ft. Length
|
Rubber Tracks Model RT381X42LX101.6 NMC AV
|
LOT: Assorted Caterpillar Parts including Teeth & Protectors in (6) Crates
|
LOT: Assorted Caterpillar Parts including Cylinders, Arms, Cutting Edge, Drive Shaft, Sprockets & Rim on (5) Pallets
|
LOT: Assorted Parts including Volvo Windshield, Caterpillar Cutting Side Brushes, Plates, Radiators, Caterpillar Bushings & Caterpillar Shields in (5) Crates
|
LOT: Assorted Caterpillar Parts including Rollers, Pumps, Brake Caliper, Cylinders & Pins in (3) Crates & (2) Pallets
|
LOT: (2) 25 in. Dia. Idler Wheels in (2) Crates
|
LOT: Assorted Caterpillar Seat Parts on (3) Pallets
|
LOT: Assorted Caterpillar Windows on (2) Pallets & (1) Crate
|
LOT: Assorted Caterpillar Parts including Sprockets, Cone, Bearing,, Spacers, Gears, Hoses, Valves, Tub Assembly on (3) Pallets
|
LOT: Assorted Caterpillar Wear Plates (located outside building - rack included)
|
LOT: Contents of (4) Rows of Shelving including Caterpillar Parts, Braces, Bearings, Rollers, Electrical, Hydraulics, Filters, Brake Parts, etc. (includes 24 sections shelving)
|
LOT: Assorted Hydraulic Hoses & V-Belts (hanging on wall)
|
LOT: (15) Assorted Cubby Cabinets with Fittings, Connectors, Caps
|
Durhan 2-Door Steel Cabinet with Inside Trays, with Contents of Assorted Tube Fittings
|
2-Door Wood Cabinet with Assorted Welding Rods, MIG Gun, Grinding Wheels, Brushes
|
LOT: Assorted Bearings & Housing Units on (1) Pallet
|
LOT: Assorted Rosemount Flow Meters on (4) Tables (includes tables)
|
Jamco 90 Gallon Flammable Storage Cabinet
|
LOT: Assorted Electrical Parts including Fittings, J Boxes, Wire, Fuses, Breakers, Disconnects & Cables on (10) Sections Metal Shelving (includes shelving)
|
LOT: Approx.. (144) Assorted Fire Extinguishers
|
LOT: Assorted Safety Equipment including Harnesses, Vests, Hard Hats, Cold Water Suits, Life Preservers, Rope, Plastic Chain, Locking Safety Caps
|
LOT: (2) Electric Pond De-icers, Assorted Unistrut Poles & All Thread
|
LOT: (19) Sharpe FS50114R Valves in (1) Crate
|
Fisher 10 in. V150 Valve
|
Fisher 8 in. V200 Valve
|
Fisher 8 in. V200 Valve
|
Fisher 6 in. V200 Valve
|
LOT: (7) Assorted Fisher Valves
|
LOT: (10) Assorted Actuator Valves
|
LOT: (38) Assorted Gate & Butterfly Valves on (12) Pallets & (1) Crate
|
LOT: Assorted Sprockets, Pulleys & Hubs on (1) Section Shelving & (1) Crate (contents only)
|
LOT: Assorted V-Belts (hanging on rack & on two sections of shelving - shelving not included)
|
LOT: (14) Cubby Cabinets with Contents of Nuts, Bolts, Hammer Screws, Washers, Connectors, Plugs, etc.
|
LOT: (4) Rice Lake 65023 Load Cells
|
LOT: (12) Eagle Butt Cans (new in boxes)
|
LOT: Assorted Warehouse Lighting on (7) Pallets
|
LOT: Assorted Electrical Enclosures, Controls, Cables, Steel Connectors, Seal Tight Connectors & Plates on (11) Pallets
|
LOT: Allen Bradley Parts including Powerflex Cabinets, Enclosures, Disconnects, Modules, Coils & Fuses on (6) Pallets
|
LOT: Assorted Pipe Fittings, Connectors, Ts & Elbows on (10) Sections of Pallet Rack (rack not included)
|
Metso MM100 Slurry Pump (2013), No Motor (new in box)
|
LOT: Assorted Slurry Pump Parts on (1) Pallet
|
Krebs RM200 Pump Housing
|
Metso HM150 Pump Housing with Impeller
|
Metso MM300 Pump Housing
|
Flowserve 6FRBH111 Centrifugal Pump (rebuilt - not installed)
|
LOT: Assorted Pump Housing, Liners & Impellers on (6) Pallets & (1) Crate
|
LOT: Assorted Pump Parts including Impeller & Plates on (4) Shelves - parts only)
|
LOT: Assorted Conveyor Parts including V-Rollers, Rubber Rollers & Supports on (2) Sections Pallet Rack - parts only)
|
LOT: Assorted 2-Way Radios & Chargers
|
LOT: Assorted Hose & Tube on (3) Shelves (no shelving)
|
Baldor Dodge MagnaGear 210K Gear Box, 22:381 Ratio
|
Sew Eurodrive R137 AD4 Gear Box, 32:91 Ratio
|
Falk M1140DXG3CS Gear Box
|
Sew Eurodrive R167 AD6 Gear Box, 44:87 Ratio
|
LOT: (6) Assorted Gear Boxes on (4) Pallets
|
LOT: (4) Cubby Cabinets with Assorted Bolts, Nuts, Clamps, including Buckets on Floor
|
LOT: (37) Motion Control D125ERC Cylinders
|
LOT: Assorted Work Lights, Hose Reels, Locks on (2) Pallets
|
LOT: Assorted Gear Boxes, Connectors, Electrical Boxes, Air Compressor (parts machine), Eye Wash Canisters, Fan, Portable Heaters on (12) Pallets & (1) Crate
|
LOT: Hydraulic Fluid, No. 2 Grease, Lithium Complex Grease, Emergency Fuel Treatment for Gelled Diesel Fuel, Diesel Fuel Supplement
|
Onyx 8 in. Model DAC-PF0 Pneumatic Pinch Valve
|
Onyx 8 in. Model DAC-PF0 Pneumatic Pinch Valve
|
Onyx 8 in. Model DAC-PF0 Pneumatic Pinch Valve
|
Parker 10 in. TG-AGI-10 Pneumatic Gate Valve
|
Parker 8 in. TG-AGI-6 Pneumatic Gate Valve
|
Sm-Cyclo CNVMSI-615SYC-8 Mixer Blade, with Electric Motor
|
Submersible Pump, 6 in. Exit Dia. (used with truck wash)
|
Submersible Pump, 4 in. Exit Dia.
|
LOT: (3) Assorted Submersible Pumps
|
Bell & Gossett Size 1510 Centrifugal Pump, 40 HP Motor, 4 in. x 2-3/4 in.
|
Metso MM150 Slurry Pump, 75 HP
|
LOT: Assorted Pump & Pump Parts on (5) Pallets
|
LOT: (4) Assorted Gear Boxes & Parts
|
LOT: Approx. (200) Assorted Magnet Cans (located on five sections pallet rack - racks not included)
|
LOT: (11) Spools Assorted Size & Type Wire Cable
|
LOT: Assorted Electrical Panels & Parts
|
U-Line 14-Step Rolling Stock Ladder
|
LOT: (61) Sections Assorted Size Pallet Rack, (370) 9 ft. Cross Beams, 48 in. Upright Width, 10 ft. - 12 ft. - 16 ft. Upright Heights
|
Caterpillar 5000 lb. Model C-6000LP Warehouse LP Forklift, Solid Tires, 199 in. Lift of 3-Stage Mast, Side Shift. (Delayed Pickup 10/30)
|
Skyjack SJIII 3226 Electric Scissor Lift, with On-Board Charger
|
Krebs MM400 Slurry Pump on Skid (no motor)
|
Metso MM400 Slurry Pump Housing on Skid (no impeller, no motor)
|
Gorman Rupp 112E60-B Centrifugal Pump, S/N 1528833 (no motor - not installed)
|
LOT: (4) Assorted Safety Guards for Heavy Equipment
|
LOT: (90) 55 Gallon Barrels of AISI 430 Stainless Balls (used in REV magnetic separation process)
|
LOT: Contents of (13) Shelves of Pallet Rack including Valve, Pipe Connectors, Magnet Cans, Side Brushes (shelving not included)
|
LOT: (7) Sections Pallet Rack - (8) 10 ft. x 4 ft. Uprights, (28) 9 ft. Cross Beams
|
LOT: (2) Propane Storage Cages, with Propane Bottles
|
LOT: 40 ft. Cargo Container, with Contents (next to warehouse)
|
20 ft. Cargo Container Used as Office, with Contents (next to garage)
|
40 ft. Cargo Container Used as Work Shop, with Contents (next to #5 MCC building)
|
40 ft. Cargo Container Used as Lunch Room, with Contents (next to garage)
|
40 ft. Cargo Container Used as Work Shop, with Contents (next to garage)
|
LOT: Assorted Shackles, Exstention Cords, Slings, (2) Ladders.
|
1000 Gallon LP Gas Storage Tank, with Zimmer LPG Vaporizer
|
1000 Gallon LP Gas Storage Tank, with Zimmer LPG Vaporizer
|
1000 Gallon LP Gas Storage Tank, with Zimmer LPG Vaporizer (next to warehouse)
|
1000 Gallon LP Gas Storage Tank, with Zimmer LPG Vaporizer (next to #5 MCC building)
|
1000 Gallon LP Gas Storage Tank, with Zimmer LPG Vaporizer (next to garage)
|
1000 Gallon LP Gas Storage Tank (next to locker room building - not installed)
|
LOT: (4) Assorted Pipe Racks, with Contents (by Grizzly conveyor)
|
LOT: (2) Gas Bottle Cages (bottles not included)
|
LOT: Assorted Equipment in Various Stages of Disrepair including Mobile Conveyor, (2) Screens, Waste Oil Tank, Connectors, Flammable Storage Cabinet, Pipe Rack, Pump Barge with Pump (located by Caterpillar 613 tanker)
|
2001 Navistar 4300 Service Truck. VIN 1HTMNAAM22H384087
|
LOT: Quantity of Assorted Clarkson Valves.
|
Inv # 7C-MA07 - 2 Units - NORTH STAR 9' x 10' Disc Filters each including Northstar Disc filter, 600 HP Vaccuum Pump, the associated snap blow compressors, lube pumps, receivers, piping and remote actuated valves and the electrical starters for all the foregoing
As Is Where Is |
Assorted Clarkson Valves pulled on 11/16/19
|
Assorted Fisher Valves per proposal dated November 8, 2019
Estimated quantities will be adjusted if necessary. |
250 HP Motor
|
HDPE Pipe throughout site shown by Steve Muslin when inspected
|
Fisher Valves on PO #PPL200302-1
|
LOT: (78) Rosemount Transmitters
|
(2) KGD6 Clarkson Valves
|
(7) KGD8 Clarkson Valves
|
(7) KGD10 Clarkson Valves
|
(1) KGD10 Clarkson Valve
|
Log Washer - Including $2k for loading and $4k for freight
|
LOT: (9) 1,000 Gallon Propane Tanks
|
Metso Apron Feeder and the Metso Grizzly Scalping Screen Located in th Truck Dump Building.
|