Absolute Machine Shop NetAuction

Auction starts: February 18, 2021 at 12:00 PM EST , Closing begins: February 22, 2021 at 12:00 PM EST

Lyons, NY

Items


Item 1 Engle Brake: 18 Gauge, 130in length, Model: 1010BA, Serial Number: 1797-A-8
Item 2 Mechanical Brake: Sturdy Bender Bending Press, 10 Gauge, 96in length, Model: G-410, Serial Number: 4219, clutches were rebuilt and machine was reconditioned in 2020
Item 3 Hand Brake: Chicago 48in, Model: 416, Serial Number: 104329, 16 ga capacity
Item 4 Liner Machine: Duro Dyne- Power Liner Sizer, Model: PLS RH, Serial Number: 452, 110 volt, air required, capacities up to 2in, 40 linear feet per minute
Item 5 Insulation Pin Spotter: Duro Dyne- Rolling Head, Model: RH, Serial Number: 1565, welds SSP, CP + FTC type fasteners, duct to 16 gauge, 220 volt air required
Item 6A Jet Drill Press, Model: 38147, floor model, 110 volt
Item 6B Craftsman Multi Speed drill press, floor model, Model: 132550, 110 volt
Item 7 Engel Compact Coiline. AMS Controls Version 2.09, Six Coil Capacity, 208 Volt, Model: 5-16, Serial Number: 300071, over top 6 coil capacity, 16-18 gauge, 3 phase, (6) 5ft de-coilers, 10,000lb capacity, shear, notch and bead capabilities
Item 9 Turning Machine: Rams SM Equipment, Multiple Dies including beading, crimping, flanger: air operated. Model: Rams 2019, Serial Number: PRM01190, 14 gauge power rotary, 12in throatfoot operated
Item 10 Conduit Insert Machine (pincher): Used for making tie rods. Uses conduplug spring # EG0993-C, and conduplug 1/2in nylon no spring nut #EG0991-C. Includes a good quantity of supplies
Item 11 Turning Machine: Lockformer, Sunken End Cap Rolling machine. Model: 20 Gauge, dual forming. Serial Number: PL1487.
Item 12 Cybermation Machine/Table: Cybermation Inc. Dual Plasma Table. half inch capacity plasma machine. Downdraft table exhaust including exhaust fan and duct. Model: 700A Plus. Includes accessories, software and books. 800 IPM rapid traverse speed. Hypertherm Powermax 65 cutting unit, 1/2in cap - PC control
Item 13A Radius Flange Turning Machine. 5/16in: Lockformer, 110 Volt, 16 Gauge capacity. Model: 16 Gauge, Serial Number: 200-5
Item 13B Radius Flange Turning Machine. 1/4in: Engle Edgemaster Flanger, 110 Volt, 16 Gauge capacity. Model: 316-3. Serial Number: 3802-89
Item 14 CNC Brake: Haco Atlantic. 220/440 Volt 3 ph. Model: SRM-135.10. Serial Number: 80293
Item 15 'Notcher' Machine: Engle Notching Unit, 18 Gauge Capacity. Model: 1010 LM-AP. Pneumatic. Includes approx 20 dies of various shapes. Serial Number: 2594.
Item 16 Air Compressor on Wheels: Speedaire 80 gallon horizontal tank, 5hp, 3 phase. Model: 5Z404C.
Item 17A Miller Goldstar 300 SS power source welder. Model: 300 SS, 3 phase, Serial Number: HH068337
Item 17B Miller Goldstar 300 SS power source welder. Model: 300 SS, 3 phase. Serial Number: JE762370
Item 18 Mechanical Shear: Wysong, 10 Gauge Capacity. Model: 1040-RD. Serial Number: P32-1282
Item 19 Slip Rolls 4in: Niagara, power rolls. Model: 351-P, 12 gauge, 4ft. Serial Number: 56334
Item 20 Electric Chop Saw: Everett Industries, Everett, 3210 RPM. Model: 16 Mit, 7.5 hp, 3 phase. Serial Number: 98-3949
Item 21 Notcher Machine: Engle, Hammer Lock, 115 Volt. Model: M-750. Serial Number: 2003-98
Item 23 Welder: MIG135, Aluminum MiG Welder. Constant Potential DC Welding Source.230/460/575, 21.5/10.8/8.6. Model: CPSS-135 with gun and wire. Serial Number: P7973 YK11217111
Item 24 1/4 in Hand Former: Hand Bender, 1/4in and 3/8in flange. 24in Wide
Item 25 Hand Drive Former: Tennsmith, 24in Wide.
Item 26 Welder: Miller CP-200 Mig Welding machine. Constant Voltage DC ARC Welding Power Source. Model: 902930. Serial Number: JK540681
Item 28 Welder: Miller Maxstar 152. CC/DC Inverter Welding Power Source, with cart. Model: MAXSTAR 152. Serial Number: KH387370
Item 30 Copier: TOSHIBA, E Studio167 Copying Machine with fax. Model: DP-1670, in working order. Serial Number: CW I 728763
Item 31 Heatcraft Refrigeration Evaporator: Never installed. Left over from a refrigeration project, new in the box. Model: LWAG1450BEC. Serial Number: F15F03100, 208v, single phase.
Item 32 Heatcraft Refrigeration Evaporator: Model MLTH4220SA, S/N T15E14918, 208v, single phase, Never installed. Left over from a refrigeration project. New in the box.
Item 33 Titus Wall Diffusers: Never installed. Left over from a HVAC project. (64) still in original boxes. Neck size is 18in X 12in. Four Way Deflection, Surface mount application. White in Color. 24x20. Model: #250 RS.
Item 34 Titus Return Grilles: Never installed. Left over from a HVAC project. (20) still in original boxes. (3) Neck size is 22in X 22in. (1) 12x6. (21) 24x20. Surface mount application. White in Color. Model: #350 RL
Item 35 (11) BROAN Energy Star Hoods: Never installed. Left over from a HVAC project. Still in original boxes. 30in Wide Stainless Steel. Model: QDE30SS. Serial Number: 0100160901283
Item 35A (11) BROAN Energy Star Hoods: Never installed. Left over from a HVAC project. Still in original boxes. 30in Wide Stainless Steel. Model: QDE30SS. Serial Number: 0100160901283
Item 36 EVERETT Industries: Everett Cut Off Chop Saw. 220/440 Volt Working condition. Model: 20 22. Serial Number: 2945
Item 37 LINDE MIG Welder: Linde MIG 31A Wire Feed Welding Machine. Not tested, as is condition. Model: MIG-31A
Item 38 Steel Gantry: Heavy Duty Steel Gantry on wheels. (2) Top H-Beams, couple Beam Trolleys. Adjustable Height to 11ft -14ft tall.
Item 39 Steel Baskets: Heavy Duty Steel Baskets. (3) Total. Roughly 5ft X 5ft Standard Pallet Jack operation.
Item 40 Heavy Duty Steel Cabinet. Roughly 5ft Wide X 4ft Tall X 2ft Deep. Rolling Cart. Roughly 5ft Wide X 2ft Tall X 2ft Deep. Three Shelve Cart is approximately 6ft Long X 2ft 6in Deep. Heavy Duty Steel Work Bench. Roughly 10ft Long X 3ft Deep X 3ft High. 2 tall cabinets.
Item 43 Sketch Paper & Stand: 48in Wide Brown Sketch Paper with Wooden Stand. Used for layout.
Item 44 Metal Storage Rack Vertical: Flat Metal Storage Rack 9ft 6in Long Stand.
Item 45 Kohler Sink : Surface Mount Double Bowl Cast Iron Sink. Enameled Cast Iron, Kohler. Old. Never installed.
Item 46 Heavy steel table, approx 4ft x 8ft
Item 47 (2) Steel rolling carts
Item 48 (2) Flat steel rolling tables
Item 49 (2) Steel rolling tables
Item 50 (4) Steel rolling tables
Item 51 (2) Steel rolling tables
Item 52 (2) Rolling ables and (1) Welding table
Item 53 (2) Rolling tables
Item 53A - (2) Rolling tables
Item 54 (3) Stock carts with 2 wheels
Item 55 (3) Stock carts with 2 wheels
Item 56 (4) Stock carts with 2 wheels
Item 57 (3) Stock carts with 2 wheels
Item 58 (2) Rolling carts
Item 59 (3) Steel pound tables
Item 60 (3) Welding tables
Item 61 Various surplus dies