Joe Lecheler Farm Machinery
Auction starts: May 16, 2018 at
12:00 AM CDT
,
Closing begins: May 16, 2018 at
06:30 PM CDT
Maiden Rock, WI
Items
HP: 127
3pt: yes Drive Type: MFWD Rear PTO: 540/1000 Rear PTO HP: 115 Hours: 3310 Front Tires: 380/85R28 (75%), Rear Tires: 20.8R38 (50%) Transmission: dual command partially synchronized, 23-forward, 12-reverse Motor: New Holland 7.5L 6-cylinder Hydraulics: quad Fuel: diesel Serial: 123987B Additional Equipment/Info: rear dual hubs, 500-hours on alternator, new starter, serial #, heated/cooled cab, with New Holland 7314 loader, serial #S8BY129 (has hydraulic leak in hydraulic control box), bale tines not included, |
69"W x 45"H, with 32"L tines
|
HP: 170
3pt: Yes Drive Type: MFWD Rear PTO: 540/1000 Rear PTO HP: 145 Hours: 7500-hours (computer was replaced with used) Front Tires: 380/85R30 front tires (90%), Rear Tires: 18.4R42 rear tires (60%), Transmission: full power shift, 16-forward, 2-reverse Motor: Ford 7.5L 6-cylinder Hydraulics: triple Fuel: diesel Serial: D417895 Additional Equipment/Info: 800-hours on rebuilt transmission, (2) sets of new rear hydraulic ports, new AC compressor, 400-hours on new alternator, front suitcase weights, rear dual hubs sold with lot 207 |
HP: 137
3pt: Yes Drive Type: MFWD Rear PTO: 540/1000 Rear PTO HP: 120 Hours: 5852 (1500-hours on rebuilt motor) Front Tires: 16.9-28 (50%) Rear Tires: 20.8-38 (40%), Transmission: dual power partial power shift, 16-forward, 4-reverse Motor: Ford 6.6L 6-cylinder Hydraulics: triple Fuel: diesel Serial: Unkown Additional Equipment/Info: remanufactured engine-clutch-ac compressor in 2005, 300-hours on new alternator, front suitcase weights, cab with air, real dual hubs |
11ft cut, 1000-PTO, good rollers and shells, serial #Y7B160194
|
HP: 100
3pt: Yes Drive Type: 2wd Rear PTO: 540/1000 Rear PTO HP: Hours: 7108 Front Tires: 11.00-16 fluid filled (90%-1 is being repaired) Rear Tires: 18.4-38 (90%) Transmission: 12-forward, 6-reverse Motor: Deutz 5.7L 6-cylinder Hydraulics: dual Fuel: diesel Serial: 79272995 Additional Equipment/Info: rear fenders, runs & drives |
1000-PTO, 13" unloading auger, 24.5-32 tires (80%), serial #6721012
|
30" rows, dry fertilizer, auger fill, serial #607704, missing (1) wheel on back, with extra set of seed boxes, with M3 monitor,
|
21ft, notched front disks, rear eveners, hydraulic lift and wings, ok tires, serial #n00724X000914
|
(6) rear weights (one set is off), needs new wiring harness, does not run, front cab door is loose, diesel, PIN #N9M400171, with front bale forks
|
540-PTO, extendable hitch, 18'L x 7'W box, good tires, serial #T534, on Meyer 1500 series running gear
|
540-PTO, extendable hitch, 18'L x 7'W box, good tires, serial #02T5426, on Meyer 1500 series running gear
|
540-PTO, extendable hitch, 18'L x 7'W box, good tires, some rust holes, serial #313319, model N10L, on E-Z Trail tandem running gear,
|
11ft, Midwest Industries buster bars, notched front discs, hydraulic lift, good tires, serial #2E2754
|
540-pto, tandem axle, slop gate, serial #HCMS1231X800055, has rust and holes
|
hydraulic lift, good tires, come chipped blades, serial #135081
|
extendable hitch,220-bushel, good tires
|
with model 112-12' auger, plastic liner, has rust holes in box, on John Deere 1075 running gear, extendable hitch, good tires
|
with Raven monitor and control, hydraulic pump, model 59402, hydraulic wings, small white tank is broken, 16.9-26 tires (50%), serial #079500446084
|
540-PTO, 9ft, serial #970083
|
540-PTO, extendable hitch, 18'L x 7'W box, ok tires, some rust holes, some deck board rot, broken drive chains, serial #313309, model N10L, on Dion running gear,
|
10ft, model #SS-1201, cultipacker wheels, serial #119968
|
(7) 8'L x 60"W x 33"H bunks, (4) 12'L head gates, conveyor not included, buyer to provide own equipment to move
|
50'L, 9" auger, belt driven, serial #61613, no motor, to be removed by buyer
|
with Marathon 2hp electric motor, 115/230-volt, single phase, 11"W, to be removed by buyer
|
14'L, deck is rotted and broken, on Linsey running gear, ok tires
|
with brackets
|
540-PTO, some rust holes, serial #CCD0006582
|
diesel, 2942-hours on meter, Ford loader, 3pt, single hydraulics, 540-PTO, needs new clutch, has broken windows, 15.5-38 rear tires (60%), front tires are bad, does not run,
|
35ft, with 2hp 230-volt single phase motor, to be removed by buyer
|
16"W, with electric motor, to be removed by buyer
|
for parts or repair, 82"H x 12.5'L x 79"W, serial #30-20S2792-CF, to be removed by buyer
|
with power chords, to be removed from silo by buyer
|
3-pt, 30" rows
|
540-PTO driven, 35-KW, 120/240-volt, single phase, serial #81673-116
|
on rim, no mounting hardware, 75% tread
|
on 8-bolt rims, 75% tread, includes hubs off of 8670 tractor
|
on 10-bolt rims, 75% tread, with bolts
|
on 9-bolt rims, 50% tread, (1) tire is flat, no mounting hardware
|
on 6-bolt rims, good tread, (1) has cracking
|
fit 60 series tractors, 21"W bracket, with (10) 100lb weights (fits lot 170)
|
good condition
|
9.5"W x 59"L
|
forks are 22"H x 48"L
|
1500lb capacity, 39"L spear, 60"W overall, serial #3724
|
74"L tines, 84"W overall
|
with new compressor, hard wired, single phase, 27"H x 44"L x 28"D, to be removed by buyer
|
with Cleveland Agitator 1/3hp single phase electric motor, tank is 92"L x 59"W x 48"H, with Mueler wash system
|
with hangers, pulsators and hoses
|
model PW-100, 220-volt
|
2hp, single phase electric motor, chute is in good condition, 16'L, chain not included, to be removed by buyer
|
with electric motor, to be removed by buyer
|
with electric motor, to be removed by buyer
|
with electric motor, to be removed by buyer
|
fiberglass housing, with electric motor, to be removed by buyer
|
model 3311, 14"H
|
made by Pelouze, 6"H
|