E-One Moli Energy (Canada) Ltd
Bidding starts: June 3, 2019 at
10:00 PM PDT
,
Closing begins: June 27, 2019 at
10:00 PM PDT
Maple Ridge, BC
Item # 292
Yamato Scientific DN410H Drying Oven
DN410H DRYING OVEN
Model: DN410H
Method: Forced Ventilation
Performance: Operating temperature ４０ ～ ３６０℃ Temperature stability*1 ±０．２℃（＠３６０℃）
Temperature Uniformity ±３．０℃（＠３６０℃）
Time to reach max. temp.*1 Approx. 60 min.
Structure: Exterior Cold rolled steel plate with baked-on melamine resin finish Interior chamber Stainless steel (SUS304) Insulating material Glass wool and Ceramic fiber Heater nominal capacity
3.0kW Fan Sirocco fan,
Output:10W×2
Cable port Inner diameter 30 mm (right side)
Exhaust Port Inner diameter 30 mm x 2 (rear face)
Controller: Temperature control method PID control by microprocessor Temperature setting method Digital setting method by KL keys (resolution: 1°C) Temperature indicating method Digital display by green LED (resolution: 1°C) Other indication Temperature pattern LED indication that shows operation indication Timer 1 min. to 99 hrs. 59 min. or 100 hrs to 999 hrs (Timer resolution: 1 min. or 1 hr.) Operation function Fixed temperature operation Auto-start/Auto-stop operation Program operation (16 segments, repeat, etc.) Additional function Calendar timer function (actual hr. timer within 24 hrs.) Integrating time function (Integrated hr. up to 49999 hrs. can be measured.) Time indication (The present time is indicated.) Calibration offset function Heater circuit control Triac zero cross system Sensor K thermocouple (double sensor) Earth leakage breaker with the over current protector Self-diagnostic function (sensor abnormality, heater disconnection and Triac short circuit detection; automatic temperature over-rise prevention) Key lock function Safety device Independent Temperature Overheat Prevention device (Digital switch input system, setting temperature range: 0 to 399°C)
Internal dimensions (WxDxH)*2 470 mm × 450 mm × 450 mm External dimensions (WxDxH)*2 640mm × 695mm × 930mm Capacity 95 l Weight Approx. 80 kg Power Requirements AC 200 V, 50/60Hz, 16A single phase Accessories: Shelf / Shelf brackets 2 sets Instruction manual For exclusive use of this oven and the controller: each one
Model: DN410H
Method: Forced Ventilation
Performance: Operating temperature ４０ ～ ３６０℃ Temperature stability*1 ±０．２℃（＠３６０℃）
Temperature Uniformity ±３．０℃（＠３６０℃）
Time to reach max. temp.*1 Approx. 60 min.
Structure: Exterior Cold rolled steel plate with baked-on melamine resin finish Interior chamber Stainless steel (SUS304) Insulating material Glass wool and Ceramic fiber Heater nominal capacity
3.0kW Fan Sirocco fan,
Output:10W×2
Cable port Inner diameter 30 mm (right side)
Exhaust Port Inner diameter 30 mm x 2 (rear face)
Controller: Temperature control method PID control by microprocessor Temperature setting method Digital setting method by KL keys (resolution: 1°C) Temperature indicating method Digital display by green LED (resolution: 1°C) Other indication Temperature pattern LED indication that shows operation indication Timer 1 min. to 99 hrs. 59 min. or 100 hrs to 999 hrs (Timer resolution: 1 min. or 1 hr.) Operation function Fixed temperature operation Auto-start/Auto-stop operation Program operation (16 segments, repeat, etc.) Additional function Calendar timer function (actual hr. timer within 24 hrs.) Integrating time function (Integrated hr. up to 49999 hrs. can be measured.) Time indication (The present time is indicated.) Calibration offset function Heater circuit control Triac zero cross system Sensor K thermocouple (double sensor) Earth leakage breaker with the over current protector Self-diagnostic function (sensor abnormality, heater disconnection and Triac short circuit detection; automatic temperature over-rise prevention) Key lock function Safety device Independent Temperature Overheat Prevention device (Digital switch input system, setting temperature range: 0 to 399°C)
Internal dimensions (WxDxH)*2 470 mm × 450 mm × 450 mm External dimensions (WxDxH)*2 640mm × 695mm × 930mm Capacity 95 l Weight Approx. 80 kg Power Requirements AC 200 V, 50/60Hz, 16A single phase Accessories: Shelf / Shelf brackets 2 sets Instruction manual For exclusive use of this oven and the controller: each one
Click any image to enlarge